Lab Chemical-60

-      Silicone Fluid Emulsion 60 RXSOL :     66.7 Kgs

-      Water (Demineralized)                     :     33.3 Kgs                                                  

TOTAL                                                     :     100 Kgs        

Adjust pH to 5.5~6.0 with acetic acid

Procedure:

·        Take   66.7 Kgs of Silicone Fluid Emulsion 60 RXSOL in a clean 100 kgs capacity SS vessel.

·        Add 33.3 kgs. of demineralized water slowly to the product under stirring & stir for 5 mins till homogeneous.

·        Adjust the pH of the product to 6.0 ± 1.0 with acetic acid if required.

·        Filter through cloth & pack.

Applications:

1.    As Mould release agent:

Should be diluted to 0.5 to 1% with water, and are generally sprayed on to the hot moulds with a spray gun. In the spraying process the finest possible mist must be produced to avoid formation of spot.  Aqueous emulsion cannot be used for cold moulds or for the painting of compounds.  In such a case, we recommend our another product Mould Release-CL which  is a non aqueous product.

 1.    By PAD process:

 As a softener

-      Silicone Fluid Emulsion 60 RXSOL    :         5 - 15 g/l

-      Wet pick up         :         70 - 80%

-      Drying

-      Curing                :         170ºC for 45 secs

Product Life and Storage: This product may be stored up to six months in a sealed container. Containers should be stored in a cool, dry area. Extended storage at elevated temperatures or exposure to direct heat or sunlight could reduce product life. Keep containers sealed when not in use.

Packing: 50 & 200 kg HMHDPE containers.