Raw Chemicals-19

LIME Marine does not corrode, erode, attack, oxidize or have other deleterious affects on virtually any metal or materials found in marine water systems such as: BRASS, IRON, LEATHER, CERAMIC ,WOOD, FIBER, PLASTICS FIBERGLASS, COPPER, STEEL, TITANIUM ,COPPER NICKEL ,RUBBER, GLASS, GELCOATS PAINTED SURFACES.

LIME Marine is an electrolyte, as are most cleaning agents. An electrolyte is any liquid that will transfer small electrical currents. Examples: salt water, vinegar, Coca-Cola. An electrolyte may cause plating in some types of equipment. This means a transfer of small amounts of one metal onto another metal according to the galvanic corrosion chart. In some instances, a thin coating of copper may be plated onto a steel drum while circulating an electrolyte such as RXLYME Marine. The only time plating occurs is when two dissimilar metals are in an electrolyte solution.

It is recommended, but not mandatory, that the LIME Marine solution be thoroughly mixed before using. Some settling of a dark precipitate may occur, resulting in an amber colored liquid, but has no negative affects upon the performance of the solution.

LYME MARINE is scale dissolving chemicals. Lyme marine descaler effectively cleans fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems.

LIME Marine has the ability to dissolve approximately 1 Kg of calcium carbonate scale per 3.75 Ltrs in concentrated form. If the LIME Marine is diluted, it will still dissolve 1 Kg of carbonate scale per 3.75 Ltrs, but will require additional circulating time.
The concentrated solution can be held safely in the open hand without deleterious affects. It will however cause a stinging sensation when contact is made on an open wound or cut. If this occurs, simply rinse thoroughly with soap and water.

#MarineBiodegradableDescaler_SoharOMAN
#DescalerFORTitaniumTUBES_dubaiUAE
#ScaleREMOVER_Sharjah
#DescalingCHEMICAL_barkaMUSCAT

LIME Marine  is non-corrosive, non-hazardous, and biodegradable. With the reduction of labour and operating costs, downtime, and no installation costs, accompanied with the heavy duty cleaning power, LIME Marine keeps your vessel at sea generating revenue.

LIME Marine manufacturer and supplier in Mumbai, Kandla, Vizag - Visakhapatnam, Surat, Chennai - Ennore, Kolkata - Haldia - Paradip, Fujairah - Dubai, Abu Dhabi - Sharjah, Muscat Barka RUWI,  Oman Sohar, Nairobi Kenya Uganda Africa

#MarineDescaler_ManufacturerSupplier
#MarineScaleCleaner_IndiaUAEoman
#MarineDescaler_DubaiSharjahAjman
#MarineDescaler_MuscatOmanSohar

Butyl Alcohol (Sec-) manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Butyl Alcohol (Sec-) at a competitive price from us. We have ready stock of Butyl Alcohol (Sec-) in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

PONCEAU 4R manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of PONCEAU 4R at a competitive price from us. We have ready stock of PONCEAU 4R in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Boiling point‎: ‎240 °C (464 °F; 513 K)
EC Number‎: ‎215-676-4

Crystal Glass Etching Acid

Melting point :124.6°C (Sublimes at higher temperature) 

Crystal Glass Etching Acid is a white crystal salt chemically when Crystal Acid comes in contact with water resulting with the formation of HF.  It is used to brighten aluminum and other metals.

We are also keeping ready stock of Potassium Bifluoride.

We provide all types of Fluoride Chemicals. 
Ammonium Fluoride
Potassium Hydrogen Fluoride
Aluminum Fluoride
Nickel Fluoride
Magnesium Fluoride
Stannous Fluoride

Crystal Glass Etching Acid

Other Name : 

(Ammonium hydrogen fluoride, Acid ammonium fluoride, Ammonium hydrogen difluoride )

As an additive to sand in the process of casting magnesium and magnesium alloys, mordant for aluminium, Aluminium anodizing (Metal labels).
Crystal Glass Etching Acid also used for brightening of aluminium, purifying & cleansing beer dispensing apparatus, tube, sterilizing dairy & other food equipment, Glass and electric lamp bulb industry.

Crystal Glass Etching Acid also used as an ingredient of the etching mixture (Glass Frosting), porcelain industries.

Crystal Glass Etching Acid for the removal of iron stains (laundry sour).


Wood preservatives. In Electroplating Industries for pickling of metals (e.g. Steel sheet prior to Nickel plating, Zinc prior to Copper plating), In nuclear chemistry for the separation of Uranium from Iron, Vanadium, Beryllium and Zirconium.

Crystal Glass Etching Acid ABF dealer, supplier in Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Dubai, Sharjah, Abudhabi, Fujairah, Muscat Barka, Sohar, Oman, UAE Middle East, Canada

Difference between HF and Crystal Glass Etching Acid uses.

HF 70% acid Handling is very dificult also makes hole in glove finger tips. While Crystal Acid never had a burn with solid Crystal Acid, however avoid to use by bare hands. If comes in contace quickly rinse with free flowing water. Always handle Crystal Acid with care and wear eye and skin glove protection during mixing or using, and never handle Crytsal Acid with your bare hands.

Handling Procedure of Crystal Acid and HF
Calcium gluconate gel is helpfull cream to protect from HF / Crystal Acid burns to the skin. On contact immediately flush the contact part with cupious amount of water and applying calcium gluconate gel followed by immediate medical attention.

USES of Crystal Acid :
As a Aluminum brightener use 28% (wt) Crystal Acid to 72% (wt) water.
To Etch  Glass use 1 Kilo Crystal Acid and 2 liters sulfuric acid in  3 gallons water bath.

RXSOL Fluoride, are counted amongst the leading manufacturer, supplier, wholesaler and exporter of Fluoride Chemicals, Cryolite Chemicals and Fluoborate Chemicals. These products are recognised for their accurate composition.

We are manufacturer, supplier, wholesaler and exporter of Sulphate Chemical, Lithium Chloride and Potassium Metaborate. All these products are processed with top-grade ingredients in order to ensure their compliance with the international quality standards. These products are highly acclaimed by our most valued clients for their excellent finish, unique formulation, purity, longer shelf life and perfect finish. Owing their numerous other features, these products are highly valuable for pharmaceutical, chemical and bio-technology industries.

Sodium Benzoate Food Grade aqueous solution is alkaline in nature with pH value 8 approximate.  Sodium Benzoate Food Grade is combined with water, benzoic acid is produced. Benzoic acid is the active form of the preservative—the form that protects foods. Benzoic acid is also found naturally in some fruits, such as cranberries, plums, and apples.

Medicinal application of Sodium Benzoate to control Ammonia in URINE ?

Liver diseas problem generate excess of Ammonia in waste product and release ammonia via urine.  Uses of sodium benzoate may help treat such things. The chemical reduces high blood levels of the waste product ammonia, such as in people with liver disease or inherited urea cycle disorders — conditions that limit the excretion of ammonia via urine.

Sodium Benzoate, NF/FCC is widely used in carbonated and still beverages, syrups, cider, salted margarine, olives, sauces, relishes, jellies, jams, preserves, pastry and pie fillings, low fat salad dressing, fruit salads, prepared salads, and in storage of vegetables. Some generalized applications are described in the following examples. Keep in mind that both federal and state regulations may apply to specific applications. These regulations should be reviewed and verified as applicable or non-applicable for each specific use application.
 
BEVERAGES:
Sodium benzoate is the standard preservative used in carbonated beverages. Typically 0.03 to 0.08% is used for the finished products. Sodium benzoate is often used to preserve the flavor syrup prior to the addition of the beverage acidulant. Non-carbonated beverages normally require somewhat higher concentrations of 0.05 to 0.1% sodium benzoate in the finished products.

CIDER:
The shelf life of non-pasteurized cider can be greatly extended by using sodium benzoate and it should be added as soon as the juice is pressed. A slight tang, which many tasters apparently prefer, may be imparted to the cider by concentrations of sodium benzoate as low as 0.04%.
 
MARGARINE:
Margarine is regulated by standards of identity described in 21 CFR 166.110. Sodium benzoate is allowed as a preservative up to 0.1%. Special attention to the preservation may be required for low salt or salt free margarine, as salt may exhibit a synergistic effect with sodium benzoate.

SYRUPS:
Concentrated sugar solutions are somewhat resistant to fermentation under ideal conditions but may be subject to quality deterioration in non-ideal circumstances. Sodium benzoate may be used to inhibit microbial growth in these syrups at levels of about 0.1% at pH values below 4.5. In chocolate syrups and other fountain syrups with pH values above 4.5, sodium benzoate may be used in conjunction with other preservatives that are more effective in that pH range.
FRUITS, FRUIT JUICES, AND FRUIT SALADS: Typically sodium benzoate will be used at levels of 0.05 to 0.1% to preserve these products. Maraschino cherries are preserved with 0.05 to 0.1% sodium benzoate. The shelf life of chilled citrus salads is materially improved by the use of 0.03 to 0.08% sodium benzoate in the cover syrup.

ORANGE JUICE PRODUCTS:
Orange juice products are regulated by standards of identity of “Orange Juice with Preservative” described in 21 CFR §146.152 and "Concentrated Orange Juice with Preservative" 

FRUIT BUTTERS, JELLIES, PRESERVES, AND RELATED PROUDCTS: Fruit butters, jellies, preserves, and related products are regulated. According to that regulatory description, GRAS preservatives such as sodium benzoate are permitted as optional ingredients in a concentration reasonably required for preservation. Artificially sweetened fruit jelly is and artificially sweetened fruit preserves and jams to contain sodium benzoate up to a level not to exceed 0.1%, by weight, of the finished food.

SALAD DRESSINGS:
Non standardized salad dressings which have a relatively low fat content may be preserved by the use of sodium benzoate at a use level of 0.1%, if the product is below a pH of 4.5.

PREPARED SALADS:
Prepared salads are generally kept under refrigeration but additional protection against mold and yeast growth may be gained by using 0.1% sodium benzoate. The pH of these products should be below 4.5 for the preservative to be effective. The preservative should be added with the salad dressing or with the gelatin solution.

NON-STANDARDIZED SAUCES AND CONDIMENTS:
Many non-standardized sauces and condiments that have a pH range below 4.5 may be effectively preserved with sodium benzoate at 0.05 to 0.1%.PICKLES AND PICKLE PRODUCTS: Yeast and mold contamination and scum formation in pickles and pickle products may be controlled with up to 0.1% sodium benzoate. The sodium benzoate may be added with the sweet juice to be used on the pickles, which may make up about one-third of the total bulk content. Consequently, 0.3% sodium benzoate could be added to the sweet juice to attain not more than 0.1% sodium benzoate in the entire finished product.

PHARMACEUTICAL, TOILETRY, AND COSMETICS APPLICATIONS:
Sodium benzoate, NF/FCC is used extensively in pharmaceutical preparations, toiletries, and cosmetics. Sodium benzoate is a well-known and widely used preservative for pharmaceutical products such as syrups, flavored vehicles, and multiple dose containers for liquid preparations. The pH is an important factor and use levels may vary.In the manufacture of compressed tablets that will give clear solutions, a level of 2 to 4% sodium benzoate powder in the granulation has been described as an efficient lubricant and provides rapid disintegration times. Sodium benzoate has a solubilizing effect of certain drugs, which is useful, for instance, in caffeine preparations or certain anesthetic compositions. Sodium benzoate is also used as a diagnostic acid for liver function.Sodium benzoate is a safe, economical preservative in certain toiletries preparations such as creams, lotions, gum solutions, and toothpaste. The advantages of sodium benzoate in these applications are that it is colorless, odorless, readily soluble, and generally is compatible other ingredients. Sodium benzoate has been generally reported to be used at concentrations below 3%. The preservative is also most efficient at lower pH values. The inhibitory level of sodium benzoate in emulsions increases with oil content. Sodium benzoate has found antimicrobial applications in mouthwashes, dermatological creams and ointments, and deodorants.

OTHER USES:
Sodium benzoate has been used as a preservative for various juice extracts during processing steps and in the finished product. One such application is in the use of sodium benzoate as a preservative for yucca juice extract, which is a natural surfactant used in dairy waste control.
Many other uses of sodium benzoate, NF/FCC are possible in these industries whenever there is an application for a preservative and the parameters of the media are suitable or may be made suitable for sodium benzoate.

INDUSTRIAL APPLICATIONS:
CORROSION INHIBITION:
Sodium benzoate has found considerable application as a corrosion inhibitor in low concentrations. Corrosion inhibition has been reported for steel, zinc, copper, copper alloys, soldered joints, aluminum, and aluminum alloys. As a liquid phase inhibitor, low concentrations of sodium benzoate have been reportedly been used for corrosion control at a pH as low as 5.5, but the most effective inhibition appears to be in the pH range of 6 to 12. The effectiveness of the corrosion inhibition has been reported to be positively affected by small concentrations of Sodium Nitrite and negatively affected by concentrations as low as 0.1% of Sodium Chloride and / or Sodium Sulfate.
A critical minimum pH for inhibition with respect to the sodium benzoate concentration has also been indicated.

It has been suggested that sodium benzoate reduces fouling by reducing the tendency of rust and scale to dislodge from corroded surfaces. Sodium benzoate does not cause foaming or frothing when-used as a corrosion inhibitor in these applications. Sodium benzoate also presents no toxicity problems when used as a corrosion inhibitor, which could be an asset in applications sensitive to odor and toxicity.
The use of sodium benzoate impregnated in paper wrappers has also been used to inhibit the corrosion of tin, steel, chrome plated, and galvanized surfaces even in humid environments. Total contact of the metal surfaces by the wrapping medium is required. In some instances, wrapper protection has been unsuitable and the metal parts have been reported to be inhibited by dipping in solutions of Sodium benzoate. Sodium benzoate has also proved useful in protecting the metal containers for such products as agricultural chemical solutions, household products, waxes, polishes, and aerosol products. Corrosion around labels on tins has been prevented by Sodium benzoate in the adhesive emulsion. Can rusting in neutral to slightly acidic emulsion paints has been prevented by use of sodium benzoate. Sodium benzoate undoubtedly has additional applications as a corrosion inhibitor and has been more extensively evaluated outside the United States where it is more frequently used in that application, especially in automotive engine cooling service.
 
OTHER INDUSTRIAL USES:
Several other industrial uses for sodium benzoate have been discovered and they are quite valuable. Some of these uses include chemical intermediates, catalysts, and as nucleating agents for polyolefin manufacture.

Sodium Benzoate Food Grade exporter and supplier in Muscat, Sharjah, Fujairah, Dubai, Mumbai, Kenya, Nairobi, Mombasa, Uganda, Canada, Kolkata, Gandhidham, Chennai, Visakhapatnam.