Stains Indicator Reagents-69

SEA POWER CLEANER Degreaser Plus Degreaser Plus is classified as marine base tank cleaning chemicals and degreaser. Its powerful degreasing action helps to clean and emulsify heavy oil and grease to make water soluble. SEECLEANER Degreaser Plus concentrated cleaner based on petroleum solvents, emulsifying agents and surfactants.

Highly effective concentrated cleaner .
Versatile, can be used for a wide application range ( for TANK or general cleaning .)
Provides quick and thorough emulsifying action.
Can be used for cleaning , gas freeing of double bottom, deep and other fuel oil bunker tanks.
May also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks.
It can be used as a general purpose cleaner to remove oil and grease deposits  and cleaning of bilge spaces and engine rooms from soiled surfaces. Can be used for degreasing and cleaning engine cooling water systems

 

SEA POWER CLEANER Degreaser Plus is powerfull solvent based degreaser. SEA POWER CLEANER easily penetrate oil greasy mud and also breakes the Carbonacious deposits.

#Sea_Cleaner
#Seacleaner_IndiaUAEoman
#sea_cleaningCHEMICALS

SEA POWER CLEANER Degreaser Plus most common degreaser in Shipping marine Industries. In shipchandling line SEA POWER CLEANER Degreaser Plus is such a popular degreaser, no one need its eplanation about its uses. SEA POWER CLEANER can be utilized directly on metal surface or this can be diluted with water for light weight cleaning. Popularity of SEA POWER CLEANER Degreaser Plus is only due to its multi function properties. All Engineering section maintenance can be controlled by SEA POWER CLEANER Degreaser Plus most common tank cleaner for lube oil / any petro solvent carrier.

SEA POWER CLEANER Degreaser Plus supplier in Mumbai, Surat, Gandhidham - Kandla Deen Dayal Port, Sikka - Jamnagar, Manglore, Goa, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Sharjah, Abu Dhabi, Dubai, Muscat Sohar Oman Barka, Navi Mumabi MIDC, Canada

Sodium Metabisulfite also called Sodium disulfite, disodium pentaoxodisulfate, disodium pyrosulfite.

Sodium Metabisulphite C.A.S. number is 7681-57-4 and its Chemical formula. Na2S2O5 and molecular weight is 190.11

Also we are keeping ready stock of these products :

SODIUM SULPHATE 99% WHITE POWDER CRYSTAL 50 KG BAG
PHOSPHORIC ACID 85% WHITE LIQUID POWDER
Caustic Soda Lye
HYDROGEN PEROXIDE 50% LIQUID 35 KG CARBOY PACK
CITRIC ACID 99% POWDER
caustic soda flakes
BLEACHING POWDER
SODIUM NITRATE
ACETIC ACID

Synonym: Sulfurous Acid, Disodium Salt 

Chemical Name: Sulfurous acid, Disodium salt 

Chemical Formula: Na2So3

#SodiumSulphite_UnitedArabEmiratesDubai
#SodiumSulphite_MuscatOman
#SodiumSulphite_MumbaiVizagKolkataChennaiGandhidham

Our range includes Sodium Thiosulphate, Sodium Acetate, Sodium Metabisulphite, Sodium Bisulphite, Sodium Sulphite Anhydrous, Ammonium Sulphate, Ammonium Chloride, Magnesium Sulphate, Sodium Phosphate (Mono / Di / Tri) etc.

Sodium Metabisulfite supplier and exporter.  Sodium Metabisulphite also called sodium pyro sulphite. Food grade of Sodium sulphite is used as preservative agent, reducing agent, Antibrowning agent, antioxidant, flour treatment agent also as preservative in biscuit industries.

We are keeping ready stock of Sodium Metabisulfite in 25 Kg and 50 Kg pack. And we are one of popular sodium metabisulphite supplier in Mumbai, Kandla - Gandhidham, Chennai - Ennore, Visakhapatnam, Kolkata, Fujairah, Dubai,  Sharjah, Abu Dhabi, Sodium Sulphite supplier in Barka Ruwi Muscat Oman

Sodium Metabisulfite is White crystals or crystalline powder having an odour of sulfur dioxide
 

HOW to TEST purity of Sodium Sulfite?

PURITY TESTS
Reagents: Hydrochloric acid, hydrazinium sulfate, standard selenium solution (100µg Se/ml)

Procedure

Weigh 2.0 ± 0.1 g of sample and transfer to a 50-ml beaker. Add 10 ml water, 5 ml hydrochloric acid and boil to remove SO2.
Into a second beaker, weigh 1.0 ± 0.1 g of sample, add 0.05 ml standard selenium solution and proceed as above.
To each beaker add 2 g hydrazinium sulfate and warm to dissolve. Let stand for 5 min. Dilute the contents of each beaker to 50 ml in a Nessler tube and compare the colour of the two solutions. The sample should be less pink than the sample with the added standard.

METHOD OF ASSAY

Weigh 0.2 g of the sample to the nearest mg, add to 50.0 ml of 0.1 N iodine in a glass-stoppered flask, and stopper the flask. Allow to stand for 5 min, add 1 ml of hydrochloric acid, and titrate the excess iodine with 0.1 N sodium thiosulfate, adding starch TS as the indicator. Each ml of 0.1 N iodine is equivalent to 4.753 mg of Na2S2O5.

• Compatible with the polyamide and cellulose acetate RO membranes of the leading manufacturers.

Antiscalant RO is a liquid antiscalant designed to inhibit scale in cellulose acetate and polyamide membrane separation systems. The formulation contains a 35% by weight solution of poly acid that has a tight molecular weight range of 2000.

This product is designed for use in waters that do not have a high potential for colloidal and silt fouling of RO membrane surfaces (i.e. groundwater applications).

Antiscalant RO  can be injected neat or diluted and a site‐specific dosage can be determined.
 

Application:

Antiscalant RO  performance is achieved when the chemical is injected downstream of multimedia filters and upstream of cartridge filters. For maximum effectiveness, Antiscalant RO should be added prior to the static mixer or cartridge filter housing. For potable  the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water

Key Features and Benefits

• Effective scale inhibition 
• Alkalinity builder 
• High recovery rate 
• Low Chemical dosage 
• Cost Effective 
• Effective Iron fouling control by sequestration 
• Reduced frequency of membrane cleaning 
• Compatible with all types of membranes 
• Completely organic and biodegradable 

Our RO Antiscalant  is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 1ppm and maximum dosage at 15ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. 

In case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 10-15ppm for stabilizing Calcium. 

At about 10-15ppm dosage our RO Antiscalant (HIGH PH) is capable of fully inhibiting iron and calcium, and silica up to 166ppm. For higher silica content RXSOL ANTISCALANT should be used. 

Antiscalant RO                                   RXSOL-33-3302-025
Antiscalant C.I ALKA                          RXSOL-33-2034-025
Membrane Antiscalant ALKA 191T    RXSOL-33-3321-030 
Antiscalant ORG EV 2030                 RXSOL-33-3325-230
Antiscalant RXSOL ORG EV             RXSOL-33-3327

Performance:

This product offers a variety of critical performance and application benefits: Inhibits RO membrane scaling caused by the following:

Key Features and Benefits of ANTISCALANT RO Reverse Osmosis

• Inhibit scale formation and effectively controls corrosion

• Protects the membrane efficiently

• Can be used neat or diluted

• Enhance the plant operation and equipments life span

• Tolerant to oxides of iron, aluminium etc

• Economical

• Compatible with almost all RO membranes

• Easy in usage and handling

• Excellent results as a replacement for softener filters

• Highly effective for scale prevention from calciumcarbonate, calcium sulfate, barium sulfate, and strontium sulfate

• Cleans the membrane surface by dispersing foulants

• Works on wide range of pH

Packaging and Storage:

Standard regional pack sizes are listed below and custom packaging can be provided worldwide. This product should be protected from freezing.

Packing 30 Kgs, 230 Kgs drum.

Antiscalant  RO manufacturer and supplier Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Surat, Fujairah, Dubai, Sharjah, Abudhabi, Oman, Muscat Barka, Sohar Ruwi, Sudan, Yemen, Nairobi KENYA, Gujrat Vizag Ennore, Haldia, Paradip

#ROantiscalant_India
#ROantiscalant_DubaiUAE
#ROantiscalant_Muscat
#ROantiscalant_Sudan
#ROantiscalant_Yemen

#ANTISCALANTforREVERSEOSMOSISinUAE

#ANTISCALANTforREVERSEOSMOSISinOMAN

#ANTISCALANTforREVERSEOSMOSISinINDIA

In humans, oxalic acid has an oral (lowest published lethal dose) of 600 mg/kg (human).

The main toxicity of oxalic acid is due to the precipitation of calcium oxalate in the kidneys when urine becomes supersaturated with respect to this salt. Oxalic acid is also a metabolism product of the degradation of ethylene glycol if accidentally ingested and, as such, directly represents a danger for the kidneys in case of glycol poisoning.


First Aid
IF SWALLOWED -Give 1 or 2 glasses of water and call for medical assistance immediately.
EYE CONTACT - Wash with plenty of water for at least 15 minutes; Get medical attention promptly.

Handling Procedure ::: ---
Donot contact with skin and eyes. May cause burns or irritation. Harmful if swallowed. Can be Neutralised by use Ammonia or Borax, or wash with water.
DO NOT allow solution to get into gloves or soak through clothing to skin.

Oxalic Acid manufacturer supplier distributor in Mumbai, Kandla Gandhidham, Kolkata, Vizag Visakhapatnam, Surat Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Oxalic Acid at a competitive price from us. We have ready stock of Oxalic Acid in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

#OXALICacid_MUSCAT
#oxalicACID_DUBAI
#OXALICacid_supplier
#oxalicacid_manufacturer

Physical Properties
  
Density                    1.06
Packing, Type         25 Ltrs
Colour                    Colourless
Appearance            Liquid

WHERE USED:

- RR WEST UNITS

- CBDC UNIT U-2026: USED IN FRESH COOLING WATER SYSTEM (U-2026) OF CBDC TO  PROTECT CARBON STEEL AS WELL AS YELLOW METALLURGY OF FCW COOLERS. FROM CORROSION AND CONTAINS PH BUFFERS TO DEFEND THE SYSTEM AGAINST PH CHANGES.

 

NOTE :

- SHELF LIFE REQUIRED IS 2 YEARS (MINIMUM) FROM DATE OF PRODUCTION 

Item Specs:

GENERIC TYPE: CORROSION INHIBITOR

FORM: LIQUID

SERVICE: WATER TREATMENT

 

Features of Cool Water Treat Corrosion Inhibitor

• Contains Corrosion inhibitors for C.S, S.S, & Cu, which helps to extend equipment life & reduce maintenance costs.

• Contains no heavy metals compatible with antifreeze, no environmental restrictions.

• Completely water soluble, which enhances complete system protection.

• Contains high concentrations of active inhibitors, thus dosage rates become more cost effective.

• Cool Water Treat Corrosion Inhibitor is most effective at pH> 8.0.

• Cool Water Treat Corrosion Inhibitor is formulated with a synergistic blend of nitrite and other Inhibitors.

• Contains a blend of alkalis to offer metal passivation.

• Contains a special dye to trace system leaks & observe Inhibitor Concentration.

• Cool Water Treat Corrosion Inhibitor contain special Corrosion Inhibitors that can tolerate moderate heat fluxes.

• Contains Corrosion Inhibitors for soft metals (weld joints).

RXSOL Cooling water Treatmanet Corrosion Inhibitor is an organic liquid corrosion inhibitor with low-toxic property provides long-life corrosion protection for closed cooling water systems RXSOL Cooling water Treatmanet Corrosion Inhibitor will protect all commonly used materials in engine cooling water systems, including aluminium. Cooling water Treatmanet Corrosion Inhibitor  does not contain components subject to rapid depletion. Cool WATER treat  is stable and  biodegradable

Cool water Treat Corrosion Inhibitor manufacturer and supplier in Mumbai, Gandhidham, Chennai Ennore, Visakhapatnam, Kolkata, Haldia, Hazira, Surat, Vizag, Fujairah, Sharjah, Ajman, Dubai, Muscat Canada, SUDAN, Yemen, Nairobi Kenya