RIGS Oil Field-34

Product Properties

Ship Chandlers of Mumbai, Kandla, Visakhapatnam, Chennai, Kolkata, Haldia, Fujairah, Dubai, Sharjah, Abudhabi, Muscat Sohar are well known to us to procure our TANK CLEANING and other Marine Chemicals.

Using-Procedure    

Spraying:–

This can be beneficial as part of the initial cleaning process after the carriage of Lube oils and Lube oil additives.  As soon as the tank in question has been checked empty by the attending surveyor, RXSOL-20-2001-210  should be sprayed over all surfaces which are safely reacheable.
 

Portable machines:–

After 45 minutes the butterworth machines should be operated for 3 x 20 minutes drops using warm 60o C, then the machines brought back to the top and a full hot wash 80 – 85 o C should be carried out for at least 6 hours.

Fixed machines:–

Wash ambient for 45 minutes followed by warm water for one cycle before increasing to hot (80oC) for 4 hours.

Injection:–

This can be carried out by injecting RXSOL-20-2001-210  into the butterworth system after the heater. A normal amount to use would be 100 – 150 liters during the initial washing cycle.  Water temperature should be 60o C during the injection period then brought up to 80 – 85 o C for the full washing period.

Re-circulation:–

Possibly the best result are achieved by re-circulating a solution of RXSOL-20-2001-210 after the initial rough washing of the tank.  A sufficient amount of fresh water to maintain good suction should be heated  to 60 o C and approximately 420 liters of RXSOL-20-2001-210  (2 drums) added for each 500 liters of fresh water.  The temperature of the mixture can be increased depending upon  the melting point if the product being cleaned.  The solution should be circulated for at least 4 hours and the butterworth machines  operated at maximum pressure in all areas of the tank  throughout this process.  If a number of tanks are to be circulated, then a substantial quantity of solution can be made so that transfers can be made without delay and any small amounts lost will not affect the operation.  Normally following transfer to another tank, 100 liters RXSOL-20-2001-210  is added for each 5000 liters of solution.  This is called “spiking”.
  

Following the re-circulation process, the tank must be hot butterworthed 80-85o C for at least 6 hours.
      *Use         a                 strainer                at               the                 pumpstack               when               circulating          any                        solution              RXSOL-20-2001-210 is recommended for local cleaning and degreasing and may be applied  by  brush,  hand  spray, immersion, soaking or any other conventional means. Apply concentrate RXSOL-20-2001-210 over  soiled  area  and wait for 20-30 minutes before rinsing off with water.
 

Soak Method:-

For heavy oil and soil Put parts to be cleaned into a bath of concentrate RXSOL-20-2001-210 and  for medium to light soiling use a solution of 10-30% RXSOL-20-2001-210 in water. Parts should be soaked for at least  30 minutes  before washing off with water.

Spray-Method:-

Spray concentrate  RXSOL-20-2001-210  over all soiled areas.  With in  15  and  30   minutes,  RXSOL-20-2001-210 starts   its function then rinse off by water hose. For stubborn deposits, agitation by scrubbing will  assist  the  cleaning operation .

Cargo Tank Cleaning after Mineral Oils

Direct injection method:–

Make  a   solution  of  RXSOL-20-2001-210  between   0.1  and  2.0%   i.e.   one   to    twenty    litres    per  ton   wash water.   Then      use     with     Tank     cleaning      machine ,    Best     results    are     obtained   when   water  is    heated  to  a     temperature      between          60  to  80°C.  Slops Should              be             Constantly              Stripped       from, tank.                                                   

Recirculation method / Ship's Rocking Mottion:– 

Make  soln.  Strength  with RXSOL-20-2001-210 between  0.5 –3 %  and  used  with  Tank Cleaning machines OR fill the tank to 20-30% volume with sea water and add the RXSOL-20-2001-210 up to full dose  . For better  results  heat  the solution  between 60 - 80°C.

NOTE : Dose rate and results will vary depending on amount of contamination.

Spot cleaning- RXSOL-20-2001-210  (concentrate) can be sprayed over surfaces and left  for  20 - 30 minutes  Finally wash down the tank surfaces with hot  water between 60°C and 80°C with  high  pressure   machine .   Keep stripping tank slops and transfer to holding tank/slop tank.Cleaning  of  theOil  side of  Lube  Oil Heat Exchangers  Cleaning  is  best  achieved  by the recirculation method using a heated 20% solution of RXSOL-20-2001-210.
1) First of all drain off any remaining oil from Heat Exchanger.
2) Connect the discharge side of a portable pump to the lower heat exchanger connection & the suction Side of the pump to the bottom outlet of a 200 litre drum.
3) Complete the circuit by connecting the upper connection on the heat exchanger to the top of the drum.
4) Maintain the bath temperature between 60-80 0 C throughout the cleaning operation.  If it is not possible to heat, the operation will need to be extended.
5) Use the pump to maintain circulation for 12 to 15 hours.  When the cleaning is completed, disconnect the lower heat exchanger connection and drain out the cleaning solution.
6) Connect a fresh water supply to the upper heat exchanger connection, and rinse until the water runs clean from the lower connection.                                                                                                                                                                                                                                                              When rinsing is complete, disconnect the water supply and thoroughly drain and dry the heat exchanger

Most Powerful and well know Ship Tank Cleaning chemicals and Detergent.
Tank Cleaner RXSOL-20-2001-210 is specialized for for Black oil, Oily Greasy Mud, effective on all types of SLUDGE generated by petroleum based product.

RXSOL TANK CLEANER HD is Heavy Duty Solvent Based Cleaner - With new generation FORMULA.

#TankCleaner_Fujairah
#TankCleaner_UAE
#TankCleaner_Mumbai
#TankCleaner_Visakhapatnam_Vizag
#TankCleaner_KandlaMundra
#TankCleaner_Chennai
#TankCleaner_Kolkata
#TANKcleaningCHEMICAL_Muscat

Tank cleaning is the process of removing hydrocarbon vapours, liquids or residues.

Tank Cleaner effectively cleans Oil Residue and Sludge from tanks which is compulsory prior to repair tank.

Tank Cleaner HD RXSOL manufacturer and supplier in Mumbai, Kandla, Mundra, Hazira, Chennai, Kolkata, Buz Buz, Visakhapatnam, Gangavaram, Haldia, Paradip, Nairobi, Kenya, Africa, Fujairah, Sharjah, Ajman, Abudhabi, Dubai UAE GULF Middle East, Muscat Ruwi Ghala Barka, Oman Sohar, Yemen, Sudan

Tank cleaning Chemicals suitable and popular to clean oil tankers, shipping vessels, and other waterborne vessels. Also RXSOL TANK CLEAN HD effectively clean engine rooms, pump rooms, storage rooms, bilge tanks, slop tanks, fuel oil tanks and oil spills area.

RXSOL-20-2002-020 is an extremely effective  liquid blend of  concentrated emulsifier with penetrating agents,mild abrasives and wetting agents which makes this an excellent  liquid scouring cleansers for cleaning and degreasing of double bottom,deep tanks etc which is used for fuel oils It can also be used for   BOILERS, MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms  on deck.

Before using Solvent based Emulsify Degreaser Cleaner for Marine Ship Industries Use Handgloves, Goggles and safety mask before using in Tank. Keep container tightly closed and away from direct heat, fire and sunlight.

Question: How to Clean Oily Greasy mess in Marine Industries, Heavy Indutries, Factory and in Automobiles industries?
Answer: Selection of Cleaner is very important to get optimize result. Many emulsifier is developed by the chemical industries, and some of emulsifer is very effective on Oily Greasy mass. RXSOL Brand continiously working to develop our product since 1995, RXSOL BRAND SEA POWER CLEAN is formulated with new generation product Emulsifier of DOW CHEMICALS with highly soluble penetrating result oriented solvent, Which is resulting to clean emulsify oily greasy mess. 

Solvent based Emulsify Degreaser Cleaner for Marine Ship Industries SEA POWER CLEANER ( Powerful Solvent Degreaser Tank cleaner ) in hot water (up to 50-degree centigrade) to get maximum cleaning effect during bilge clean and degreasing action. We have done many experiments and observed that, if you want to save more Solvent based Emulsify Degreaser Cleaner for Marine Ship Industries SEA POWER CLEANER ( Powerful Solvent Degreaser Tank cleaner ) qty, use hot water during the cleaning operation. This trick will not only save operational time but also save required qty of Solvent based Emulsify Degreaser Cleaner for Marine Ship Industries SEA POWER CLEANER ( Powerful Solvent Degreaser Tank cleaner ). After reading this line don't think POWER CLEANER ( Powerful Solvent Degreaser Tank cleaner ) will not work with water at room temperature, Only thing is if you are using room temperature water then the slightly higher concentration of Solvent based Emulsify Degreaser Cleaner for Marine Ship Industries SEA POWER CLEANER ( Powerful Solvent Degreaser Tank cleaner ) required and slightly more time will consume to clean oily and soiled parts.

RXSOL POWER CLEANER ( Powerful Solvent Degreaser Tank cleaner ) is premium quality product specially formulated for cleaning of oily greasy surface of tanks.  to emulsify all types of oils using hot or cold processes. Field area double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.

Highly concentrated product only ½ to 1 litre of RXSOL-20-2002-210 required per tone of water, when ROCK and Roll tank cleaning method adopted. Refer below " Dose " block to view complete method.

Solvent based Emulsify Degreaser Cleaner for Marine Ship Industries SEA POWER CLEANER - Powerful Solvent Degreaser Tank cleaner supplier in Mumbai, Surat Hazira, Gandhidham Kandla, Mundra, Jamnagar, Chennai Ennore, Gangavaram Visakhapatnam, Kolkata, Haldia, Paradip, Ajman, Fujairah, Dubai, Abudhabi, Muscat Ruwi Barka, Sohar, Oman, Canada BC

#MarineCHEMICAL_SEAcleaningCHEMICAL
#SolventBased_SeaVoyageCLEANER
#DeckENGINE_cleaner
#EngineMAINTENANCE_CleaningCHEMICAL
#OilGrease_Remover
#Oilgrease_EmulsifierCLEANER
#SEAcleaning_Emulsifier

GENERAL CLEANING AND SOLVENT is a concentrated, biodegradable water soluble liquid 

Free from caustic / Alkali based materials, While general Deck cleaners are typically made up of caustics soaps that will aid in the scrubbing or pressure washing of your wood during the prepping process. 

pH Balance 
it is non–flammable 
non– corrosive and non–toxic. 

Cleaning Solvent manufacturer and supplier in Oman Muscat Barka, Fujairah, Dubai, Ajman, Sharjah, Abudhabi, UAE Middle East, Mumbai, Kandla, Chennai, Kolkata, Haldia, Surat, Gandhidham, Canada, Yemen, Sudan, Ruwi Sohar

Also refer this LINK for similar familly product : http://rxmarine.com/natural-degreaser-biodegradable-no-vocs-natural

As nouns the difference between perchloroethylene and tetrachloroethylene. is that perchloroethylene is an alternative name for tetrachloroethene, a non-combustible solvent commonly used in dry cleaning while tetrachloroethylene is tetrachloroethylene.

Perchloroethylene is used in aerosol formulations for the automotive aftermarket, particularly for brake cleaning, as well as water repellents for garments, spot removers and silicone lubricants. It can be used as an insulating fluid in some electrical transformers as a substitute for polychlorinated biphenyls (PCBs).

TETRACHLOROETHYLENE, Perchloro Ethylene exporter and supplier in Fujairah Jerf Ajman, Dubai, Sharjah, Abudhabi, Muscat Barka, Sohar Oman, Mumbai, Kolkata, Chennai, Visakhapatnam, Surat Gujrat, Gandhidham India, UAE Middle East, Oman, Nairobi Kenya Africa, Canada

Physical State : Liquid
Appearance    : Blue
Spec Gravity: 1.01
PH: 13.0
Solubility in Water: Complete

RXSOL GOLD Industrial Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of RXSOL GOLD Industrial Cleaner at a competitive price from us. We have ready stock of RXSOL GOLD Industrial Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.